Item # PE172, Electric Pump Hydraulic PE17 Series Up to 55 Ton On Metro Hydraulic

For maintenance and construction applications.
For use with single-acting or double-acting cylinders at operating pressures to 10000 psi.
For intermittent duty; starts under full load.
Equipped with 1/2 hp, 3450 rpm, single-phase, thermal protected induction motor; 10 ft. remote control cord (PE172S has 25 ft. cord).
Low amperage draw; small generators and low amperage circuits can be used as power source.
Extremely quiet with noise level ranging from 67-81dBA.
The remote motor control switch on 220V., 50 cycle PE17 series pumps is 24 volt.
Usable oil is calculated with the oil fill at the recommended level of 1 1/2" below reservoir cover plate.
Available with 220 V., 50 Hz motor (to order, place suffix “50-220” behind pump order number).
“Advance” position holds pressure with motor shut off. “Return” position advances cylinder with motor running and returns cylinder with motor shut off.

Unit of Measure

Description	N/ABase model pump has 1/2 hp pump with 2 gallon thermoplastic reservoir.
Capacity	N/A17 cu. inch/min
For Use With	N/ASingle Acting
Valve Type	N/A2 - Way
Valve No.	N/A9517
Valve Function	N/AAdvance Return (Auto)
Control Switch	N/ARemote Motor Control (10 ft.) on/off
Motor	N/A1/2 hp 110/115 V 50/60 Hz, Single Phase
Reservoir Usable Oil Capacity	N/A295 cu. inch
Speed	N/A2
Maximum Pressure Output	N/A10000
RPM	N/A3450
dBa at Idle and 10000 psi	N/A67/81
Amp Drawn 115 v at 10000 psi	N/A10
Oil Delivery at 0 psi	N/A290 cu. inch/min
Oil Delivery at 100 psi	N/A190 cu. inch/min
Oil Delivery at 5000 psi	N/A20 cu. inch/min
Oil Delivery at 10000 psi	N/A16 cu. inch/min
Dimension A	N/A18 1/2 inches
Dimension B	N/A7 inches
Dimension C	N/A11 3/8 inches
Dimension D	N/A7 1/8 inches
Dimension E	N/A14 7/8 inches
Dimension F	N/A9 1/4 inches
Dimension G	N/A5 1/8 inches
Product Weight With Oil	N/A45 lbs.
Ship Weight	N/A54 lbs.

Description