For over 70 years, Metro Hydraulic Jack Company, a third-generation, family-owned and operated business, has been providing industrial hydraulic parts and equipment services to commercial, automotive, marine, refuse, and construction industries.
More About Our Company
17 1/2 Ton Capacity can be used with Nos. 1124 and 1130 bearing pulling attachments or Nos. 679 and 680 pulley pulling attachments. May also be used with Nos. 1150, 1151, 1153, 1165, or 1166 internal pulling attachments Legs ends threaded 3/4 Inch - 18. No. Spread 1106 legs and No. 24827 leg ends included. Wt., 20 lbs., 12 Oz.
Unit of Measure
Weight |
N/A11.5 lbs. |
Leg Length |
N/A30 inches |
Ship Weight |
N/A12 lbs. |
N/A
1.Determine if you want the tool’s forcing screw to push or pull. 2. To exert pushing force, the forcing nut is installed beneath the cross block, as shown on left. 3.导致the forcing screw to pull, the forcing nut is placed on top of the cross block. 4. The sliding plates must always be placed on the opposite side of the cross block from the forcing nut. |